Transport Ventilators & Air/Oxygen Blender

Transport Ventilators

Crossvent 3+ Adult and Pediatric Ventilators
Superior portability, flexibility and performance

Crossvent 3+ Ventilator offers a wide range of ventilatory support for both pediatric and adult patients in a variety of setting from air and ground transport to emergency department to ICU to subacute care and more.

You can order the Crossvent 3+ in any one of three configurations: standard, with Bio-Med Air/Oxygen Blender attached, or with air entrainment. The attached blender allows the user to set oxygen concentration from 21% to 100%. Units with air entrainment can deliver either 100% oxygen or a nominal 50% oxygen without the need for an external air supply source. The unique verturi mechanism built into the unit increases oxygen tank life by mixing ambient air with the source oxygen

The Crossvent 3+ can be powered by a compressor, blended gas or 100% oxygen, and its consumption of gas is extremely low. Using the color touchscreen display, operators can easily select the appropriate ventilation mode.

NEO2 BLEND Blender

Air/Oxygen Blender

Bio-Med Devices is excited to announce the introduction of the latest addition to our line of precision Air/Oxygen blenders...the uniquely designed, gas saving NEO2 BLEND! Designed for the Neonatal Intensive Care Unit, it comes with two integral flowmeters. The flowmeter on the left side is for flows from 1 to 15 LPM. The right side flowmeter is 0 to 3.5 LPM. Unlike other blenders, the NEO2 BLEND allows you to turn off the low flow gas bleed without disconnecting anything from the blender thus saving time, aggravation, gas and ultimately, money. This means the blender is always ready to use.

Oxygen % 21 - 100%
Number of Ports 2
Left Flowmeter Range 3 - 15 LPM with no bleed,
1-3 with 3 LPM bleed
Right Flowmeter Range 0-3.5 LPM with 3 LPM bleed
Accuracy +/- 3% full scale
Size 8.13 x 6.55 x 4.60 in
20.65 x 16.64 x 11.68 cm
Weight 4.05 lbs
1.84 kg

Transport Ventilators

Crossvent 2+
Neonatal through Pediatric Ventilator
Superior portability, flexibility and performance.

Bio-Med Devices’new, industry-leading Crossvent 2+ Ventilator offers a wide range of ventilatory support for both pediatric and infant patients in a variety of settings from air and ground transport to emergency department to ICU to subacute care and more.

A choice of configurations
You can order the Crossvent 2+ with or without the attached Bio-Med Devices Air/Oxygen Blender. The blender allows the user to set oxygen concentration from 21% to 100%.

A range of modes and alarms
Using the color touchscreen display, operators can easily select the appropriate ventilation mode: Assist Control, SIMV, CPAP, Presure Support, Flow Trigger or Pressure-limited Constant Flow. Available alarms include exhaled tidal volume, PIP, PEEP, mean pressure, low supply pressure, rate, oxygen concentration and low battery. The Auto Set feature allows the user to set the primary alarms quickly and easily with a single key.

Dependable power
The Crossvent 2+ can be powered by a compressor, blended gas or 100% oxygen, and its consumption of gas is extremely low. The internal battery provides power during transport and in the event of AC power failure.If the external power should fail,the unit will automatically switch to its battery power and sound an alarm. A fully charged battery will last approximately 6 hours.